Durango 2WD V8-5.7L Hybrid (2009)
Fuel Injector: Service and Repair
Fuel Injector - Removal
REMOVAL - HEV
WARNING: On vehicles equipped with the high voltage system, you must thoroughly read and follow all High Voltage Safety procedures. In
addition, before performing any diagnostic or service procedure near a high voltage component, you must perform the High
Voltage Power Down. Failure to follow these instructions may result in possible serious or fatal injury See: Hybrid Drive
Systems/Battery System, Hybrid Drive/Service Precautions
1. Perform the HEV high voltage power down procedure See: Hybrid Drive Systems/Battery System, Hybrid Drive/Service and Repair/Battery
System - High Voltage Power Down
2. Remove the fuel rail assembly See: Fuel Rail/Service and Repair/Fuel Rail - Removal
3. Using suitable pliers (1), remove the fuel injector retaining clip (2).
4. Remove the fuel injector (3) from the fuel rail (4) using a side to side motion while pulling the injector out of the fuel rail assembly.