Durango 2WD V8-5.7L Hybrid (2009)
6. Disconnect the brake booster hose (1) and the vapor purge hose (2) and position aside to gain access to the fuel rail.
7. Disconnect the PCV hose (1) and position aside to gain access to the fuel rail.
8. Disconnect the fuel line quick connect fitting (2) at the fuel rail See: Fuel Line Coupler/Service and Repair
9. Disconnect the make up air hose (3) and position aside to gain access to the fuel rail.
10. Remove the four fuel rail mounting bolts (4) from both the left and right fuel rails.
11. Using a side to side motion, gently rock the left fuel rail while pulling up until all four left side fuel injectors just start to clear the machined holes
in the intake manifold.
12. Using a side to side motion, gently rock the right fuel rail while pulling up until all four right side fuel injectors just start to clear the machined
holes in the intake manifold.
NOTE: Make sure the O-rings are still attached to the fuel injectors during removal.
13. Remove the left and right fuel rails (with injectors attached) as an assembly from the engine.
NOTE: If the same fuel injectors are to be reinstalled, install new O-rings.
14. If the fuel injectors are to be removed from the fuel rail See: Fuel Injector/Service and Repair/Fuel Injector - Removal
