Durango 4WD V8-4.7L Flex Fuel (2008)
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove right rear quarter panel trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Quarter Panel Trim/Quarter
Trim Panel - Removal.
3. Remove the screws (4) that secure the rear blend door actuator (2) to the side of the rear HVAC housing (3).
4. Disconnect the rear HVAC wire harness connector (1) from the rear blend door actuator.
5. Remove the rear blend door actuator from the rear HVAC housing.