Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
Carpet: Service and Repair
Installation
INSTALLATION
1. Position the carpet in vehicle and tuck up under the side trim panels.
2. Install the third row seat assembly, if equipped.
3. Install the storage bin, if equipped, and screws and tighten the rear screws to 7 Nm (60 in. lbs.).
4. Install the second row seat assembly and install the bolts (1 & 2).
5. Tighten the front bolts (2) to 27 Nm (20 ft. lbs.).
6. Tighten the rear bolts (1) to 47 Nm (35 ft. lbs.).
7. Install the cowl trim panels.
8. Position the door sill scuff plates and seat the clips fully.
9. Install the floor console.
10. Install the front seats.
