Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
3. Position the seat belt turning loop (4) to the height adjuster (1).
4. Install the screw (3) and tighten the to 39 Nm (29 ft. lbs.).
5. Engage the tab (2) on the lower edge of the trim cover (3) in the slot below the screw in the turning loop (1). Then press the upper edge of the trim
cover over the top of the turning loop until it snaps into place.
Removal
REMOVAL
1. Move the third row seat cushion to its storage position, but leave the third row seat back in its upright position for easiest access to the seat belt
lower anchor (2) on the quarter inner panel (3).
