Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
Blower Motor: Service and Repair
Installation - Front
INSTALLATION
1. Position the blower motor and blower wheel assembly (2) into the HVAC housing (4).
2. Install the three screws (3) that secure the blower motor and blower wheel assembly to the HVAC housing. Tighten the screws to 2.2 Nm (20 in.
lbs.).
3. Connect the wire harness connector (1) to the blower motor.
4. Install the right cowl side trim panel.
5. Install the right front door scuff plate.
6. Reconnect the negative battery cable.
