dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Controls - Front|Page 8717 > < Diagram Information and Instructions|Page 8714
Page 1
background image

Control Assembly: Description and Operation
Controls - Front

Manual Single Zone

MANUAL SINGLE ZONE

The A/C-heater control (1) for the manual temperature control (MTC) single zone heating-A/C system allows one temperature setting for the entire
vehicle. All controls are identified by ISO graphic symbols.

The A/C-heater control and integral computer is located in the instrument panel and contains:

-

a rotary control knob for rear window washer operation and rear window wiper speed selection (2).

-

a slider control knob for temperature control of the discharged air (3).

-

a rotary control knob for fan speed selection and turning the heater-A/C system off (4).

-

a rotary control knob for mode control of the discharged air (5).

-

a push button A/C on/off control (6). The Snowflake button contains an LED that illuminates when the A/C system is in operation.

-

a push button rear window defogger on/off control (7). The button contains an LED that illuminates when the rear window defogger system is in
operation.

The A/C-heater control for the manual single zone heating and A/C system is diagnosed using a scan tool.

The A/C-heater control cannot be repaired or adjusted and must be replaced if found inoperative or damaged. The illumination lamps (8) and control
knobs are available for service replacement.

The A/C-heater control utilizes integrated circuitry and information carried on the controller area network (CAN) B bus to monitor many sensors and
switch inputs throughout the vehicle. In response to those inputs, the internal circuitry and programming of the A/C-heater control allows it to control
electronic functions and features of the MTC heating-A/C system.

The inputs received by the A/C-heater control of the MTC heating-A/C system on the CAN B bus are as follows:

-

Dimming

-

Refrigerant Pressure

-

Vehicle Identification Number

-

Vehicle Odometer

-

Engine Coolant Temperature

-

Ambient Air Temperature

-

Vehicle Speed

The messages broadcasted by the A/C-heater control of the MTC heating-A/C system on the CAN B bus are as follows:

-

A/C Request

-

A/C Select

-

Rear Window Defogger (EBL) Request

-

Rear Washer Request

-

Rear Wiper Request

Controls - Front|Page 8717 > < Diagram Information and Instructions|Page 8714