Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
1. Remove the rear HVAC housing (1) and place it on a workbench.
2. Disconnect the rear HVAC wire harness (2) from the rear blower motor (3) and the rear blower motor resistor (4).
3. If necessary, remove the rear blower motor.
4. If necessary, remove the rear blower motor resistor.
5. Remove the screws (5) that secure the rear air inlet housing (6) to the rear HVAC housing.
6. Remove the rear air inlet housing from the rear HVAC housing.
7. Disconnect the rear HVAC wire harness (1) from rear blend door actuator (2) and mode door actuator (3).
8. Remove the rear blend door actuator and mode door actuator from the rear HVAC housing (4).
