Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
17. Carefully lift the rear A/C evaporator (1), rear expansion valve (2) and the rear extension line bracket (3) as an assembly out of the top of the rear
HVAC housing (4).
18. Remove the rear HVAC wiring harness (1) from the rear HVAC housing (2).
19. Remove the screws (3) that secure the two halves of the rear HVAC housing together.
20. Separate the two halves of the rear HVAC housing.
21. Remove the blend-air door (4) and mode-air door (5) from the rear HVAC housing.
22. If necessary, remove the actuator couplers (6) from the rear HVAC housing.
Front HVAC Housing
ASSEMBLY
CAUTION: Be certain to adjust the refrigerant oil level when servicing the A/C refrigerant system. Failure to properly adjust the refrigerant
oil level will prevent the A/C system from operating as designed and can cause serious A/C compressor damage.
NOTE: When replacing multiple A/C system components, refer to the Refrigerant Oil Capacities chart to determine how much oil should be added to
the refrigerant system.
NOTE: If the A/C evaporator is being replaced, add 60 milliliters (2 fluid ounces) of refrigerant oil to the refrigerant system. Use only refrigerant oil of
the type recommended for the A/C compressor in the vehicle.
