Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
13. Install the two screws (4) that secure the heater core retaining bracket (5) to the HVAC housing. Tighten the screws to 2.2 Nm (20 in. lbs.).
14. Install the HVAC housing bracket (2) to the top of HVAC housing.
15. Install the two screws (1) that secure the HVAC housing bracket to the HVAC housing. Tighten the screws to 2.2 Nm (20 in. lbs.).
16. Install the heater core tube retaining bracket (4) to the top of the HVAC housing (2).
17. Install the screw (3) that secures the heater core tube retaining bracket to the HVAC housing. Tighten the screw to 2.2 Nm (20 in. lbs.).
18. Install the foam seal (1) to the flange on the HVAC housing.
19. If equipped with front dual zone automatic temperature control (ATC) system, install the passenger side blend door actuator (2), cover and
retaining screws (1) onto the bottom of the HVAC housing (3) and connect the HVAC wire harness (4).
