Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
1. Position the glove box lamp and switch unit (2) to the instrument panel (1).
2. Reconnect the wire harness connector to the lamp and switch unit.
3. Feed the wire harness back through the switch mounting hole.
4. Align the lamp and switch unit with the mounting hole in the instrument panel.
5. Using hand pressure, push the lamp and switch unit firmly and evenly into the mounting hole until it is fully seated.
6. Reinstall the glove box into the instrument panel.
7. Reconnect the battery negative cable.
