Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
11. Disconnect and isolate the negative battery cable.
12. Recover the refrigerant from the refrigerant system.
13. Remove the air cleaner housing (1) from the right side of the engine compartment.
14. Remove the rear section of the A/C liquid line (2) from the plastic retainer (3) located on the right inner fender (4).
15. Remove the bolt (1) that secures the rear section of the A/C liquid line (2) to the receiver/drier (3).
16. Disconnect the rear section of the A/C liquid line from the receiver/drier and remove and discard the O-ring seal.
17. Install plugs in, or tape over the opened liquid line fitting and the receiver/drier port.
