Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
Evaporative Emission Control Canister: Service and Repair
Installation
INSTALLATION
1. Snap canister into lock tabs (1).
2. Connect quick-connect fitting (5) to EVAP canister.
3. Connect rubber hose (2) to ESIM switch.
4. Connect electrical connector (3) to ESIM switch.
5. If equipped, install fuel tank skid plate.
6. Lower vehicle.
7. All vapor/vacuum lines and hoses must be firmly connected. Also check the vapor/vacuum lines at the EVAP canister purge solenoid for damage
or leaks. If a leak is present, a Diagnostic Trouble Code (DTC) may be set.
