Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
7. Using finger pressure only, disconnect accelerator cable connector at throttle body bellcrank pin by pushing connector off bellcrank pin towards
front of vehicle (4). DO NOT try to pull connector off perpendicular to bellcrank pin. Connector will be broken.
8. Lift accelerator cable from top of cable cam (6).
9. Press tab (3) to release plastic cable mount from bracket. Press on tab only enough to release cable from bracket. If tab is pressed too much, it will
be broken. Slide plastic mount (2) towards passenger side of vehicle to remove cable from bracket.
10. Remove throttle cable from vehicle.