Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
5. Tighten nut (1) to pull bearing into the receiver (3).
Installation
INSTALLATION
1. Remove any old sealer/burrs from axle tube.
2. Install axle shaft bearing with Installer 9337 (1) and Handle C-4171 (2). Drive bearing in until tool contacts the axle tube.
NOTE: Bearing is installed with the bearing part number against the installer.
3. Coat new axle seal lip with axle lubricant and install with Installer 9337 and Handle C-4171.
4. Install axle shaft.
