Durango 4WD V8-5.7L Hybrid (2009)
Power Steering Line/Hose: Service and Repair
Power Steering Hose - Removal
Pressure Hose
PRESSURE HOSE
1. Siphon the fluid from the power steering pump reservoir (1).
2. Raise and support the vehicle.
3. Remove the left front wheel.
4. Remove the inner fender See: Body and Frame/Fender/Front Fender/Service and Repair/Front Fender - Removal
5. Remove the return hose (5) at the gear to gain access to the pressure hose (4).
6. Remove the pressure hose (4) at the gear.
7. Disconnect the pressure hose from the retainer at the crossmember.
8. Remove the pressure hose (4) at the pump pressure hose extension (6).
9. Remove the pressure hose (4) from the vehicle.
Return Hose
RETURN HOSE
1. Siphon the fluid from the power steering pump reservoir (1).
2. Raise and support the vehicle.
3. Remove the left front wheel.
4. Remove the inner wheel well See: Body and Frame/Fender/Front Fender/Front Fender Liner/Description and Operation
5. Disconnect the return hose from the retainer at the crossmember.
6. Remove the return hose (5) at the gear.
7. Remove the return hose (5) at the reservoir (1).
8. Remove the return hose from the vehicle.