Durango 4WD V8-5.9L VIN Z (1998)
11. Lower the antenna body and cable assembly through the top of the fender far enough to access the antenna body by reaching between the right
cowl side outer panel and the fender through the front door opening.
12. Disengage the coaxial cable grommet from the hole in the right cowl side outer panel.
13. Pull the coaxial cable out through the right cowl side outer panel.
14. Remove the antenna body and cable from the vehicle.
15. Reverse the removal procedures to install. Tighten the antenna cap nut to 8 N.m (70 in. lbs.). Tighten the antenna mast to 3.3 N.m (30 in. lbs.).
Tighten the inner cowl side trim panel mounting screw to 2.2 N.m (20 in. lbs.).