Durango 4WD V8-5.9L VIN Z (1998)
Keyless Entry Receiver: Description and Operation
SYSTEM OPERATION
The Remote Keyless Entry (RKE) receiver is a radio frequency unit that is integral to the high-line version of the Central Timer Module (CTM).
The CTM also contains the program logic and control circuitry for the RKE system. The CTM is mounted under the passenger side end of the
instrument panel, outboard of the instrument panel glove box opening.
The RKE receiver has a memory function to retain the vehicle access codes of at least one, but no more than four RKE transmitters. The receiver
is designed to retain the transmitter codes in memory even if the battery is disconnected.
The RKE receiver is energized by one of three radio frequency inputs from the RKE transmitter; Unlock, Lock, or Panic. The programming of the
CTM responds to these RKE inputs, as well as many other inputs, by sending the proper control outputs to the power lock motors, the courtesy
lamp circuit, the driver unlock relay, the horn relay, and the headlamp relay.
For diagnosis or programming of the RKE receiver within the high-line CTM, a DRB scan tool and the proper Diagnostic Procedures are
recommended. The RKE receiver is only serviced as a unit with the high-line CTM and, if faulty or damaged, the CTM unit must be replaced.
