Durango 4WD V8-5.9L VIN Z (1998)
Lock Cylinder Switch: Service and Repair
Liftgate Lock Cylinder Switch
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the trim panel from the liftgate inner panel.
Liftgate Lock Cylinder Switch Remove/Install
3. Reach through the access hole in the liftgate inner panel to disengage the switch from the back of the liftgate lock cylinder.
4. Unplug the liftgate lock cylinder switch wire harness connector.
5. Remove the liftgate lock cylinder switch from the liftgate.
6. Reverse the removal procedures to install.
