Durango 4WD V8-5.9L VIN Z (1998)
5. Disengage lock cylinder to latch rod from the latch, if equipped. (Fig. 4)
6. Disengage outside handle to latch rod from the latch.
7. Remove nuts attaching outside door handle to door.
8. Separate outside handle from the door.
INSTALLATI0N
1. Position outside handle in the door.
2. Install nuts attaching outside door handle to door and tighten to 5.0 N.m (45 in. lbs).
3. Engage outside handle to latch rod to the latch.
4. Engage lock cylinder to latch rod to the latch, if equipped.
5. Install fastener access plug in the door end panel.
6. Install water dam.
7. Install door trim panel.