Durango 4WD V8-5.9L VIN Z (1998)
INSTALLATION
1. Position trim panel at door.
2. Engage wire connector for window/lock switch panel, if equipped.
3. Engage power mirror wire connector, if equipped.
4. Connect speaker harness wire connector.
5. Engage inside handle linkage rod to inside handle.
6. Align trim panel retainer steps with inner door panel and slide trim panel into place.
7. Install screws attaching trim panel to door.
8. Install window crank, if equipped.
FRONT DOOR WATERDAM
REMOVAL
1. Remove the trim panel from the door.
2. Carefully separate the waterdam from the door inner panel at the areas with adhesive. Remove the waterdam from the door inner panel.
INSTALLATION
1. Apply an appropriate adhesive/sealant to the waterdam edges before installing it.
2. Position the waterdam on the door inner panel and press it inward at the areas with the adhesive to attach it to the inner panel.
3. Ensure that the retainer step pockets are position correctly in the door inner panel.
4. Install the door trim panel.
