Durango 4WD V8-5.9L VIN Z (1998)
Fig. 14
6. Disconnect speaker harness wire connector (Fig. 14).
7. Disengage power mirror wire connector, if equipped (driver's side only) (Fig. 14).
Fig. 15
8. Disengage clips attaching power window/lock switch panel to door trim panel. Disengage wire connector from switch panel, if equipped (Fig. 15).
9. Separate door trim panel from vehicle.
INSTALLATI0N
1. Position trim panel at door.
2. Engage wire connector for window/lock switch panel, if equipped.
3. Engage power mirror wire connector, if equipped.
4. Connect speaker harness wire connector.
5. Engage inside handle linkage rod to inside handle.
6. Align trim panel retainer steps with inner door panel and slide trim panel into place.
7. Install screws attaching trim panel to door.
8. Install window crank, if equipped.
Waterdam
