Durango 4WD V8-5.9L VIN Z (1998)
Front Door Striker: Service and Repair
LATCH STRIKER
REMOVAL
1. Use a wax crayon or equivalent and mark position of striker on B-pillar.
Fig. 8
2. Remove bolts attaching striker and shim to B-pillar (Fig. 8).
3. Separate striker from B-pillar.
INSTALLATION
1. Using alignment marks, position shim and striker on B-Pillar.
2. Install the bolts tighten to 28 N.m (20 ft.lbs.).