Durango 4WD V8-5.9L VIN Z (1998)
Front Door Window Regulator: Service and Repair
WINDOW REGULATOR
REMOVAL
1. Remove door trim panel.
2. Partially remove waterdam.
3. Position glass to access the fasteners. Remove the fasteners.
4. Disengage glass from regulator lift channel.
5. Position glass up into door frame (rest glass on a block of wood on door reinforcement).
6. Disconnect regulator wire harness.
Fig. 17
Fig. 18
7. Remove screws attaching window regulator to door inner panel (Fig. 17) and (Fig. 18).
8. Remove window regulator from door.
