Durango 4WD V8-5.9L VIN Z (1998)
Rear Door Latch: Service and Repair
LATCH
REMOVAL
1. Remove trim panel.
2. Peel waterdam back to access latch.
Fig. 5
3. Disconnect latch rods from latch (Fig. 5).
4. Disconnect the latch harness connector.
Fig. 6
5. Remove screws attaching latch to rear door (Fig. 6).
INSTALLATION
1. Connect the latch harness connector.
2. Install screws attaching latch to rear door.
3. Connect latch rods to latch.
4. Install waterdam.
5. Install trim panel.