Durango 4WD V8-5.9L VIN Z (1998)
Rear Door Weatherstrip: Service and Repair
Rear Door Weatherstrip
REAR DOOR WEATHERSTRIP
REMOVAL
1. Remove door sill trim.
2. Loosen upper and lower B-pillar trim to access weatherstrip.
3. Remove C-pillar trim. Refer to Trim Panel.
4. Pull quarter panel trim outward to access weatherstrip.
Fig. 8
5. Pull weatherstrip from pinch flange around door opening (Fig. 8).
INSTALLATION
1. Clean pinch flange
2. Position the weatherstrip on the pinch flange around door opening and press into place.
3. Reposition quarter panel trim.
4. Install C-pillar trim.
5. Reposition B-pillar trim.
6. Install door sill trim.