Durango 4WD V8-5.9L VIN Z (1998)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Trim Panel
TRIM PANEL
REMOVAL
1. Pull upper trim outward to disengage spring clips.
2. Separate upper trim from liftgate.
Fig. 10
3. Remove screws attaching lower trim to liftgate (Fig. 10).
4. Pull lower trim outward to disengage spring clips.
5. Disconnect liftgate lamp wire connector.
6. Separate lower trim from liftgate.
INSTALLATI0N
1. Position lower trim at liftgate.
2. Connect liftgate lamp wire connector.
3. Align lower trim on liftgate and press inward to engage spring clips.
4. Install screws attaching lower trim to liftgate (Fig. 10).
5. Position upper trim on liftgate.
6. Align upper trim to liftgate and press inward to engage spring clips.