Durango 4WD V8-5.9L VIN Z (1998)
Trunk / Liftgate Lock Cylinder: Service and Repair
LOCK CYLINDER
REMOVAL
1. Remove liftgate trim panels
2. Remove liftgate handle.
3. Remove clip retaining lock cylinder in outside handle.
4. Remove the clip retaining actuator link to lock cylinder. Remove actuator link.
Fig. 6
5. Separate lock cylinder from handle (Fig. 6).
INSTALLATION
1. Position lock cylinder in outside handle (Fig. 6).
2. Install clip retaining lock cylinder in handle.
3. Install actuator link and retaining clip.
4. Install liftgate handle.
5. Install liftgate trim panels.
