Durango 4WD V8-5.9L VIN Z (1998)
Headliner: Service and Repair
HEADLINER
REMOVAL
1. Disconnect battery negative cable.
2. Remove sunvisors and sunvisor arm supports.
3. Remove coat hooks.
4. Remove overhead assist handle.
5. Remove dome lamp.
6. Remove overhead console, if equipped.
7. Remove outlet bezel for rear air conditioner, if equipped.
8. Remove blower control switch for rear air conditioner, if equipped.
9. Remove upper liftgate opening trim.
10. Disengage A-pillar, B-pillar, C-pillar, and D-pillar trim as necessary to prevent trim panel interference.
11. Move 2nd row seats to cargo position.
12. Move front seats to full recline position.
13. Move 3rd row seat to cargo position, if equipped.
Fig. 16
14. Remove push-in fasteners attaching headliner to roof panel (Fig. 16).
Fig. 15
15. Carefully bow headliner and remove through the liftgate opening (Fig. 15).
