Durango 4WD V8-5.9L VIN Z (1998)
Power Mirror Switch: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
Power Mirror Switch Knob Remove/Install
2. Pull the power mirror switch control knob rearward to remove it from the switch stem.
Power Mirror Switch Nut
3. Remove the nut that secures the power mirror switch to the driver side door trim panel.
4. Remove the trim panel from the inside of the driver sine front door.
5. Pull the trim panel away from the inner door panel far enough to access the power mirror switch wire harness connector.