Durango 4WD V8-5.9L VIN Z (1998)
Mounting Bracket
4. Remove the three nuts which attaches the assembly to the mounting bracket.
5. Remove the assembly from the vehicle.
6. Remove the two bolts from the HCU assembly mounting bracket and remove the bracket.
INSTALLATION
1. Install the antilock assembly bracket and tighten bolts to 14 - 15 Nm (10 - 12 ft. lbs.).
2. Install the assembly into the mounting bracket and install the three mounting nuts. Tighten the nuts to 12 Nm (102 inch lbs.).
3. Connect the CAB harnesses.
4. Connect the brake lines to the HCU. Tighten brake line fittings to 19 Nm (170 inch lbs.).
5. Connect battery.
6. Bleed brake system.
