Durango 4WD V8-5.9L VIN Z (1998)
13. Remove brake shoe retainers, springs.
14. Remove secondary brake shoe from support plate.
15. Remove strut and spring.
16. Remove parking brake lever retaining clip from the secondary shoe and remove the lever.
17. Remove primary shoe from support plate.
18. Disengage parking brake lever from parking brake cable.
INSTALLATION
1. Clean and inspect individual brake components.
2. Lubricate anchor pin and brake shoe contact pads on support plate with high temperature grease or Lubriplate.
3. Lubricate adjuster screw socket, nut, button and screw thread surfaces with grease or Lubriplate.
4. Install the parking brake cable to the parking brake lever.
5. Install parking brake lever to the secondary shoe and install retaining clip.
6. Install primary shoe on support plate. Secure shoe with new spring retainers and pin.
7. Install spring on parking brake strut and engage strut in primary.
