dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

All Other Service Bulletins for Fan Blade: > < Engine - Overheats In High Ambient Temperatures.|Page 1650
Page 1
background image

Fan Blade: All Technical Service Bulletins
Engine Cooling Fan - Roaring Noise Explanation

NO: 07-05-98

GROUP: Cooling

DATE: Sep. 4, 1998

SUBJECT:

Engine Cooling Fan Noise

MODELS:

1998 - 1999 (AB) Ram Van/Wagon
1997 - 1999 (AN) Dakota
1998 - 1999 (DN) Durango

DISCUSSION:

Some vehicles may exhibit an engine cooling fan "roar" noise. This noise is created by a large cooling fan that is required to provide optimum cooling
for low vehicle speed operation in hot weather conditions and for heavy trailer towing. Since the large cooling fan is unnecessary in most operating
conditions, these vehicles are also equipped with viscous fan drives that allow the fan to operate at variable speeds based upon temperature loads. The
viscous fan drive will engage the fan for maximum cooling when temperatures are high and allow the fan to operate at slower speeds when temperatures
are low. In addition, at engine start-up, the viscous fan drive engages the fan for maximum cooling until the fluid in the viscous clutch can dissipate out
of the clutch drive grooves allowing the fan to operate at a slower speed.

Because of the viscous fan drive, the noise may occur during high temperature conditions and for the first 1-2 minutes of operation. Due to the roar of the
fan, customers may also complain of a perceived loss of power, automatic transmission slippage, or that the transmission is slaying into a low gear too
long (delayed upshift).

Customers concerned about this noise should be advised that this condition is normal and no repair attempts should be made.

POLICY: Information Only

All Other Service Bulletins for Fan Blade: > < Engine - Overheats In High Ambient Temperatures.|Page 1650