Durango 4WD V8-5.9L VIN Z (1998)
E.
Install the No.4 cylinder plug wire to its distributor cap terminal (Figure 7).
4.
No.7 Cylinder Plug Wire Routing (Figure 8 and 9)
A.
Verify that the No.7 cylinder plug wire crosses over the distributor cap and leaves the distributor cap between the No.3 and the No.6 tower
terminals (Figure 8). This is the original wire routing for 1998 and prior model years.
B.
For 1999 M.Y. vehicles the No.7 cylinder plug wire was shortened. Reroute the No.7 cylinder plug wire so that it crosses the distributor cap
and leaves the distributor cap between the No.6 and the No.5 tower terminals (Figure 9).
NOTE:
MAKE SURE THE NO.7 CYLINDER PLUG WIRE IS, AT LEAST ONE INCH, AWAY FROM THE NO.5 CYLINDER PLUG WIRE.
