dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

A/C Bi-Level Mode - Unbalanced Vent Air Flow|Page 5751 > < A/C Bi-Level Mode - Unbalanced Vent Air Flow|Page 5749
Page 7
background image

36.

Pull the door firmly and quickly away from the instrument panel to unsnap the three glove box hinge hooks (Figure 10) from the three hinge pins
on the instrument panel (Figure 11).

37.

Reaching through the instrument panel glove box opening, perform the following:

a)

Disconnect the two halves of the radio antenna coaxial cable connector near the center of the lower instrument panel glove box opening.

b)

Disengage the antenna half of the radio antenna coaxial cable from the retainer clip near the outboard side of the lower instrument panel
glove box opening.

38.

From under the passenger side of the instrument panel , perform the following:

a)

If the vehicle is so equipped, disconnect the two instrument panel wire harness connectors from the infinity speaker amplifier connector
receptacles on the right cowl side inner panel.

b)

Remove the nut that secures the instrument panel wire harness radio ground eyelet to the stud on the right cowl side inner panel.

A/C Bi-Level Mode - Unbalanced Vent Air Flow|Page 5751 > < A/C Bi-Level Mode - Unbalanced Vent Air Flow|Page 5749