Durango 4WD V8-5.9L VIN Z (1998)
3.
Remove the screws that attach the grab handle to the A-Pillar, then separate the handle from the A-Pillar (Figure 6).
4.
Remove the screws from the cowl trim cover, then remove the cowl trim cover.
5.
Grasp the A-Pillar trim and pull outward to disengage the clips that attach the A-Pillar trim to the A-Pillar, then separate the trim from the A-Pillar.
6.
Remove the screws that attach the sunvisor arm support bracket to the headliner and the roof panel (Figure 7).
7.
It equipped, disengage the vanity lamp connector.
8.
Detach the sunvisor from the sunvisor supports and separate the sunvisor from the headliner and roof panel.
9.
Grasp both sides of the sunvisor support base and firmly pull outward to disengage the sunvisor support cover from the base (Figure 8).
