Durango 4WD V8-5.9L VIN Z (1998)
Shift Indicator: Service and Repair
GEARSHIFT INDICATOR
REMOVAL
The following service procedures apply only to the mechanical gear selector indicator. The electronic gear selector indicator is integral to the instrument
cluster and can only be serviced by replacement of the instrument cluster unit.
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument cluster from the instrument panel.
Fig. 13
3. Remove the two screws that secure the gear selector indicator mechanism to the back of the instrument cluster housing (Fig. 13).
4. Remove the gear selector indicator mechanism from the back of the instrument cluster housing.
5. Remove the steering column opening cover from the instrument panel.
Fig. 14
6. Disengage the loop end of the gear selector indicator cable from the lever on the left side of the steering column (Fig. 14).
7. Squeeze the sides of the plastic adjuster and bracket unit to disengage the tabs that secure it to the sides of the steering column window.