Durango 4WD V8-5.9L VIN Z (1998)
Map Light Bulb: Service and Repair
Reading Lamp and Courtesy Lamp Bulb
REMOVAL AND INSTALLATION
1. Disconnect and isolate the battery negative cable.
2. Insert a long, narrow, flat-bladed tool in the notch on the forward edge of the reading and courtesy lamp lens.
3. Gently pry the lens downward from the overhead console housing and pivot the lens down. It may be necessary to move the tool along the edge of
the lens to free the lens from the overhead console housing.
4. Remove the bulb holder from the lamp housing by turning it counterclockwise.
5. Remove the bulb from the bulb holder by pulling it straight out.
6. Install a new bulb by aligning its base with the socket in the bulb holder, and pushing the bulb firmly into place.
7. Reinstall the bulb holder in the lamp housing by turning it clockwise.
8. Pivot the lens back up into position and press upward firmly until it snaps into place.
9. Connect the battery negative cable.
10. Test the lamp by depressing the lens to check for proper lamp switching and lighting.
