dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Recall - Reprogram PCM|Page 182 > < Recall - Reprogram PCM|Page 176
Page 1
background image

Technical Service Bulletin # 831

Date: 990601

Recall - Reprogram PCM

June 1999

California Emissions Recall No. 831 
Reprogram Powertrain Control Module

Models

1998

(DN)

Dodge Durango (with a 5.9L engine and automatic transmission)

(AB)

Dodge Ram Van/Wagon (with a 5.9L engine and automatic transmission)

(ZJ)

Jeep(R) Grand Cherokee (with a 5. 9L engine and automatic transmission)

(AN)

Dodge Dakota (with 5.2L engine and manual transmission or  5.9L engine and automatic transmission)

(BR/BE)Dodge Ram Pickup (with a 5.2L engine and manual transmission, 5.9L engine and automatic transmission or 8.0L engine)

NOTE:

This recall applies only to certain vehicles equipped with a California emission control system (sales code NAE) built through April 30, 1998 (MDH
0430XX).

Subject

The On-Board Diagnostic (OBD) system on about 18,000 of the above vehicles may not detect evaporative emissions purge system malfunctions as
required by California Emission Regulations.

Repair

The Powertrain Control Module (PCM) must be reprogrammed (flashed).

Parts Information

Each dealer to whom vehicles in the recall were invoiced (or the current dealer at the same street address) will receive enough Authorized Software
Update labels and Authorized Modifications labels to service about 25% of those vehicles. Additional labels may be ordered as needed.

Each vehicle requires application of the following labels:

Part Number

Description

04669020

Authorized Software Update Label

04275086

Authorized Modifications Label

Completion Reporting and Reimbursement

Claims for vehicles which have been serviced must be submitted on the DIAL System. Claims submitted will be used by DaimlerChrysler to record recall
service completions and provide dealer payments.

Use one of the following labor operation numbers and time allowances:

Labor Operation

Time

Number

Allowance

PCM Update Previously Performed

08831181

0.2 hours

Reprogram Powertrain Control Module

08831182

0.5 hours

Add the cost of the labels plus applicable dealer allowance to your claim.

NOTE

See the Warranty Administration Manual, Recall Claim Processing Section, for complete recall claim processing instructions.

Parts Return

Recall - Reprogram PCM|Page 182 > < Recall - Reprogram PCM|Page 176