Durango 4WD V8-5.9L VIN Z (1998)
-
Generator mounting bolt-All engines-41 N.m (30 ft. lbs.)
-
Generator pivot bolt/nut-All engines-41 N.m (30 ft. lbs.)
CAUTION:
-
Never force a belt over a pulley rim using a screwdriver. The synthetic fiber of the belt can be damaged.
-
When installing a serpentine accessory drive belt, the belt MUST be routed correctly. The water pump will be rotating in the wrong direction if
the belt is installed incorrectly, causing the engine to overheat. Refer to belt routing label in engine compartment.
3. Install generator drive belt.
4. Install negative battery cable to battery
