dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 4893 > < Diagram Information and Instructions|Page 4891
Page 1
background image

Auxiliary Power Outlet: Description and Operation

SYSTEM OPERATION

An accessory power outlet is optional equipment on this model. The power outlet is installed in the instrument panel lower bezel, which is located
near the center of the instrument panel, below the radio. The power outlet base is secured by a snap fit within the instrument panel lower bezel. A
plastic protective cap snaps into the power outlet base when the power outlet is not being used.

The power outlet base or receptacle shell is connected to ground, and an insulated contact in the bottom of the shell is connected to battery current.
The power outlet receives battery voltage from a fuse in the Power Distribution Center (PDC) at all times.

While the power outlet is very similar to a cigar lighter base unit, it does not include the two small spring-clip retainers inside the bottom of the
receptacle shell that are used to secure the cigar lighter heating element to the insulated contact.

The power outlet receptacle unit and the accessory power outlet protective cap are available for service. The power outlet receptacle cannot be
repaired and, if faulty or damaged, it must be replaced.

Diagram Information and Instructions|Page 4893 > < Diagram Information and Instructions|Page 4891