dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Steering Column/Wheel - Clunk/Rattle|Page 5422 > < Remover/Installer, Steering Plug C-4381|Page 5413
Page 1
background image

Technical Service Bulletin # 19-12-97

Date: 971121

Steering Column/Wheel - Clunk/Rattle

NO: 19-12-97

GROUP: Steering

DATE: Nov. 21, 1997

SUBJECT: 
Clunk/Rattle Felt In Steering Column/Wheel

MODELS:
1997 - 1998

(AN) Dakota

1998

(DN) Durango

NOTE

THIS BULLETIN APPLIES TO 1998 DURANGOS BUILT BEFORE OCTOBER 27, 1997 (MDH 1127XX) AND ALL 1997 AND 1998 4X4
DAKOTAS.

SYMPTOM/CONDITION:

A clunk or rattle may be felt in the steering wheel/column during slow turns, rough road driving, and stops.

DIAGNOSIS:

Perform an inspection of front suspension and steering components, including a check of all fasteners for proper torque as specified in the appropriate
Service Manual. Test drive the vehicle on a rough or bumpy road. With both hands on the steering wheel, feel for a clunk or listen for a rattling type
noise. Perform the Repair Procedure if clunk or rattle is felt or heard.

PARTS REQUIRED:

1

55351171AA

Shaft, Intermediate, 4X4

2

06504926AA

Bolt, Pinch

1

06101510

Nut

POLICY: Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:

Labor Operation No:

19-20-12-94

0.4 Hrs.

FAILURE CODE:

P8 - New Part

Repair Procedure

This bulletin involves replacing the intermediate shaft with a revised part.

1.

Position the front wheels straight ahead. Place a steering wheel holder, SNAP-ON TOOL, p/n WA96A, or equivalent, between the steering wheel
and the driver's seat to secure the wheel.

Steering Column/Wheel - Clunk/Rattle|Page 5422 > < Remover/Installer, Steering Plug C-4381|Page 5413