Durango 4WD V8-5.9L VIN Z (1998)
Rear Band Adjustment Screw Location
4. Tighten adjusting screw to 8 Nm (72 inch lbs.) torque.
5. Back off adjusting screw 2 turns.
6. Hold adjusting screw in place and tighten locknut to 34 Nm (25 ft. lbs.) torque.
7. Position new gasket on oil pan and install pan on transmission. Tighten pan bolts to 17 Nm (13 ft. lbs.) torque.
8. Lower vehicle and refill transmission with Mopar(R) ATF Plus 4, Type 7176 fluid.
