Durango 4WD V8-5.9L VIN Z (1998)
Throttle Lever E-Clip And Washer
16. Remove E-clip and washer that retains throttle lever shaft in manual lever.
Manual And Throttle Lever
17. Remove manual lever and throttle lever. Rotate and lift manual lever off valve body and throttle lever shaft. Then slide throttle lever out of valve
body.
Detent Ball And Spring
18. Position pencil magnet next to detent housing to catch detent ball and spring. Then carefully remove Retainer Tool 6583 and remove detent ball
and spring.