Durango 4WD V8-5.9L VIN Z (1998)
The valves and valve body housings will be damaged if force is used. Tag or mark the valve body springs for reference as they are removed. Do not
allow them to become intermixed.
1. Remove fluid filter.
Governor Presure Solenoid And Sensor Wire Locations
2. Disconnect wires from governor pressure sensor and solenoid.
Governor Body And Retainer Plate Attaching Screw
3. Remove screws attaching governor body and retainer plate to transfer plate.
Governor Body And Gasket
4. Remove retainer plate, governor body and gasket from transfer plate.
5. Disconnect wires from governor pressure sensor, if not done previously.
