Durango 4WD V8-5.9L VIN Z (1998)
Lower Housing Shift Valves And Springs
5. Remove converter clutch valve, spring and plug.
6. Remove converter clutch timing valve, retainer and valve spring.
3-4 ACCUMULATOR HOUSING
1. Remove end plate from housing.
2. Remove piston spring.
Accumulator Housing Components
3. Remove piston. Remove and discard piston seals.
ASSEMBLY
CAUTION: Do not force valves or plugs into place during reassembly. If the valve body bores, valves and plugs are free of distortion or burrs, the
valve body components should all slide into place easily. In addition, do not overtighten the transfer plate and valve body screws during reassembly.
Overtightening can distort the housings resulting in valve sticking, cross leakage and unsatisfactory operation. Tighten valve body screws to
