Durango 4WD V8-5.9L VIN Z (1998)
Seat Pinion Gear Side Differential Dummy Side Bearing-Typical
Seat Ring Gear Side Differential Dummy Side Bearing-Typical
7. Using a dead-blow type mallet, seat the differential dummy bearings to each side of the axle housing.
8. Thread Guide Stud L-4438 into rear cover bolt hole below ring gear.
9. Attach a dial indicator C-3339 to guide stud. Position the dial indicator plunger on a flat surface between the ring gear bolt heads.
Hold Differential Case And Zero Dial Indicator-Typical
10. Firmly push and hold differential case to pinion gear side of axle housing.
11. Zero dial indicator face to pointer.