Durango 4WD V8-5.9L VIN Z (1998)
Heated Glass Element Switch: Service and Repair
REMOVAL
WARNING: ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO AIR BAGS AND SEAT BELTS/AIR BAGS BEFORE
ATTEMPTING ANY STEERING WHEEL, STEERING COLUMN, OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE.
FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE
PERSONAL INJURY.
1. Disconnect and isolate the battery negative cable.
2. Remove the lower bezel from the instrument panel. See Instrument Panel Lower Bezel in the Replacement of Instrument Panel Systems for the
procedures.
Rear Window Switch Pod Remove/Install
3. Remove the two screws that secure the rear window switch pod to the instrument panel lower bezel.
4. Remove the rear window switch pod from the instrument panel lower bezel.
5. Reverse the removal procedures to install. Tighten the mounting screws to 2.2 N.m (20 in. lbs.).