Durango 4WD V8-5.9L VIN Z (1998)
Wiper Arm: Service and Repair
REMOVAL AND INSTALLATION
CAUTION: The use of a screwdriver or other prying tool to remove a wiper arm may distort it. This distortion could allow the arm to come off of the
pivot shaft, regardless of how carefully it is installed.
Front
1. Open the hood of the vehicle.
Wiper Arm Remove/Install
2. Unsnap the wiper arm pivot cover by lifting it at the pivot end of the arm.
3. Remove the pivot cover by pulling it straight out from where it snaps into the wiper arm hinge.
4. Remove the nut that secures the wiper arm to the wiper pivot.
Wiper Arm Puller
5. Use a battery terminal puller to remove the wiper arm from the wiper pivot.
