Durango RT 4WD V8-5.9L VIN Z LDC (2002)
Lock Cylinder Switch: Service and Repair
Liftgate Cylinder Lock Switch Replacement
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the trim panel from the liftgate inner panel.
Liftgate Lock Cylinder Switch Remove/Install
3. Reach through the access hole in the liftgate inner panel to access and disengage the liftgate cylinder lock switch from the back of the lock
cylinder.
4. Disconnect the liftgate cylinder lock switch pigtail wire connector from the liftgate wire harness connector.
5. Disengage the retainers that secure the liftgate cylinder lock switch pigtail wire harness to the liftgate inner panel.
6. Remove the liftgate cylinder lock switch from the liftgate.
INSTALLATION
1. Position the liftgate cylinder lock switch into the liftgate.
2. Engage the retainers that secure the liftgate cylinder lock switch pigtail wire harness to the liftgate inner panel.
3. Reconnect the liftgate cylinder lock switch pigtail wire connector to the liftgate wire harness connector.
4. Reinstall the trim panel onto the liftgate inner panel.
5. Reconnect the battery negative cable.